Graphene Coating-Hard Seal 6#

SNT Protectant： Graphene Coating

The Reason for Retaining the Name Graphene Coating

The name "Graphene Coating" is continued because there is already a presence of graphene coating in the market. Moreover, consumers are already familiar with and have accepted this name. Nanook Protectant stands out with the following three unparalleled advantages:

1. Significant cost advantage.

2. Significant effectiveness advantage.

3. Exceptional environmental performance advantage.

Graphene Coating Product Introduction

Graphene Coating is a product with genuine crystallization components, distinctly different from traditional emulsified wax products. It offers a substantial enhancement in anti-pollution, hydrophobic properties, acid and alkali resistance, durability, and wash resistance.

Graphene Coating System Advantages

High Brightness

The nanoscale molecular components effectively fill in the gaps and imperfections of the car paint, enhancing the brightness of the paint and covering minor scratches, leaving the paint looking moist and shiny after application.

Super Hydrophobic

The surface contact angle is greater than 160°, and the rolling contact angle is less than 5°. Super hydrophobic properties bring ultimate anti-pollution performance, preventing dirt and corrosion, isolating the paint from stains, reducing the damage to the paint surface from external contaminants, and making subsequent cleaning of the vehicle extremely simple.

Ultra-Smooth

There are two ways to reduce the occurrence of surface scratches: one is to increase hardness, and the other is to increase surface smoothness. A smooth surface can significantly reduce the occurrence of daily scratches.

Super Durability

It is stackable, with a minimum interval of more than three hours between applications. It has high durability; a single layer of application can outperform multiple layers of wax, glaze, and sealant. Time is precious, and this product saves time and effort while providing excellent results.

Usage Instructions for Graphene Coating:

1. If the paint surface is in poor condition, it is recommended to clean with clay first before applying the coating.

2. Attach a spray nozzle and spray the product onto a sponge or cloth block, then evenly apply it to the car's paint surface.

3. Work in sections, clean the area thoroughly within about two minutes after applying, and then continue to the next section, ensuring no areas are missed.

4. Work in areas, complete one area before moving on to the next until the entire car is done.

5. If layering is desired, it is recommended to wait for more than 3 hours between layers.

6. It can be used for routine maintenance of the car's paint surface, and it can also be used on clear protective films, color change films, or other coating surfaces for daily care.

7. It can be used for coating maintenance; however, it is not recommended to apply it over wax surfaces.

The Difference Between Applying SNT Graphene Coating and Not Applying SNT Graphene Coating

This Camry has been treated with SNT Graphene Coating; water droplets carry the dust and roll off, leaving the car spotless.

This BMW has not been treated with SNT Graphene Coating. Therefore, it lacks the lotus effect, and dust remains firmly attached to the car. 

Video comparison: the difference between a car treated with SNT Graphene Coating and one that has not been treated. 

Graphene Coating Precautions:

1. If the paint surface is in poor condition, applying the product directly may affect its effectiveness.

2. Wipe off the product promptly after application; do not let it dry on the surface for an extended period, as it may become difficult to remove once cured.

3. Avoid contact with water for 24-48 hours after application to allow the product sufficient time to cure.

4. It is recommended to apply Graphene Coating indoors; avoid applying under direct sunlight and ensure the area is sheltered from the wind.

5. Do not expose the vehicle to water for two days after the full application and you can use the car as normal.

6. After using the Graphene Coating spray, make sure to replace the cap and store it sealed to prevent curing and degradation from prolonged exposure to air.

7. After applying Graphene Coating, check from multiple angles and wipe thoroughly. Residue left for a long time may become difficult to remove.